2007 Chevrolet Silverado 1500 Pickup Owner's Manual - Page 14

Easy Exit Seat The controls for this memory function are located on the driver's door. To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button. To use the seat exit position, do one of the following: • If you have an automatic transmission, press and release the exit button on the memory control while the vehicle is in PARK (P). • If you have a manual transmission, press and release the exit button on the memory control while the parking brake is set. • If this feature is activated in the Driver Information Center (DIC), removing the key from the ignition will move the seat to the exit position. See "Easy Exit Seat" under DIC Vehicle Customization on page 279 for more information on activating this feature in the DIC. B (Easy Exit Seat): This button is used to program and recall the desired driver's seat position when exiting or entering the vehicle. The seat position can be saved for up to two drivers. To store the seat exit position, do the following: 1. If you have an automatic transmission, place the vehicle in PARK (P). If you have a manual transmission, set the parking brake. 2. Press and release the 1 or 2 button. The seat will move to the stored memory position. 3. Adjust the seat to the desired exit position. 4. Press and hold the exit button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored for the selected button 1 or 2. 14