2007 Chevrolet Silverado 2500 Pickup Owner's Manual - Page 458

To use PTO speed control in variable mode (while stationary) do the following: 1. Engage the PTO. 2. Vehicle speed must be less than 5 mph. 3. Make sure your foot is off the brake pedal (and off the clutch for vehicles equipped with a manual transmission). 4. Select the desired engine speed by using the foot pedal, and select SET on the PTO switch or the cruise control. Variable Mode: PTO speed control mode can be used for both stationary and mobile applications. This mode allows PTO to be controlled in a fashion similar to how cruise control sets vehicle speed. The operator can set to an rpm (between 800 and 2,200) with the cruise control feature or with the SET position on the PTO switch. The operator is then able to increase rpm in increments of 100, or "tap up" with the resume position on the cruise control. The operator can also decrease rpm in increments of 100 with the SET switch on the PTO or the cruise control. 458