2009 Chevrolet Corvette Owner's Manual - Page 212
2009 Chevrolet Corvette Manual
Page 212 highlights
Entering the Personal Options Menu To enter the personal options menu, use the following steps: 1. If you have an automatic transmission vehicle, turn the vehicle on with the shift lever in P (Park). If you have a manual transmission vehicle, turn the vehicle on with the parking brake set. To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2. Press the OPTION button and you will enter the PERSONAL OPTIONS menu. The DIC will display the current driver number (1 or 2) for a few seconds and then will display instructions on which buttons to use for setting the personalizations. The RESET button is used to select a setting for a particular feature. The OPTION button is used to move to the next feature. 3. Press the OPTION button while the instruction screen is displayed to enter the first personalization menu item. 4. Once you have cycled through all of the personal options, pressing the OPTION button a final time exits the personal options menu. In addition, if no button is pressed within 45 seconds, the DIC will exit the personal options menu. 3-74 Personal Options The following options are available for programming: Display Units: This option allows you to choose the measurement units. Press the OPTION button until DISPLAY UNITS appears on the display, then press the RESET button to scroll through the following modes: • ENGLISH (default) • METRIC If you choose ENGLISH, all information will be displayed in English units. If you choose METRIC, all information will be displayed in metric units. When the mode you want is selected, press the OPTION button to set your choice and advance to the next personal option. Auto Memory Recall (Automatic Transmission only): If your automatic transmission vehicle has the memory package, you may have this option. This option allows the driver's seat, the telescopic steering column, if your vehicle has this feature, and the outside rearview mirrors to automatically move to the current driver's set position when the engine starts.