2009 Chevrolet Equinox Owner's Manual - Page 134

Headlamp High/Low-Beam Changer To change the headlamps from low beam to high, push the turn signal lever away from you. To change from high beam to low beam, pull the turn signal lever towards you. To flash the high beams from low beam, pull the turn signal lever all the way towards you. Then release it. When the high beams are on, this light on the instrument panel cluster will also be on. Windshield Wipers The windshield wiper lever is located on the right side of the steering column. Move the lever to the following positions: Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To flash the high beams from low beam, pull the turn signal/multifunction lever all the way towards you. Then release it. 1 (High Speed): 6 (Low Speed): & (Delay): For steady wiping at high speed. For steady wiping at low speed. Sets a delay between wipes. 6 (Delay Adjustment): Move the lever to the delay position to choose a delayed wiping cycle. Turn the intermittent adjust band down for a longer delay or up for a shorter delay. 3-8