2009 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 200
2009 Chevrolet Silverado 1500 Regular Cab Manual
Page 200 highlights
The cruise control buttons are located on left side of the steering wheel. Setting Cruise Control Cruise control will not work if the parking brake is set, or if the master cylinder brake fluid level is low. The cruise control light on the instrument panel cluster will come on after the cruise control has been set to the desired speed. { CAUTION: T (On/Off): Turns the system on or off. The indicator light is on when cruise control is on and turns off when cruise control is off. + RES (Resume/Accelerate): Press to make the vehicle accelerate or resume to a previously set speed. SET - (Set/Coast): Press to set the speed or make the vehicle decelerate. If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. 1. Press T. [ (Cancel): Press to cancel cruise control without erasing the set speed from memory. 2. Get up to the desired speed. 3. Press the SET− button located on the steering wheel and release it. 4. Take your foot off the accelerator. Resuming a Set Speed If the brakes are applied while the cruise control is set, the cruise control is disengaged. But it does not need to be reset. 3-14