2010 Chevrolet Corvette Owner's Manual - Page 364
2010 Chevrolet Corvette Manual
Page 364 highlights
Windshield Replacement The windshield is part of the Head-Up Display (HUD) system. If you ever have to get the windshield replaced, get one that is designed for HUD or the HUD image may look out of focus. Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. See Scheduled Maintenance on page 7-3 for more information. Replacement blades come in different types and are removed in different ways. For the proper type and length, see Maintenance Replacement Parts on page 7-11. It is a good idea to clean or replace the wiper blade assembly every six months. Allowing the wiper blade arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by the vehicle's warranty. Do not allow the wiper blade arm to touch the windshield. To remove the wiper blade assembly: 1. Open the hood to gain access to the windshield wipers. 2. Lift the wiper arm away from the windshield. A. Blade Assembly B. Arm Assembly C. Locking Tab D. Blade Pivot E. Hook Slot F. Arm Hook 3. Press down on the blade assembly pivot locking tab (C). Pull down on the blade assembly (A) to release it from the wiper arm hook (F). 4. Remove the insert from the blade assembly (A). The insert has two notches at one end that are locked by the bottom claws of the blade assembly. At the notch end, pull the insert from the blade assembly. 6-62