2015 Chevrolet Suburban Owner Manual - Page 4
2015 Chevrolet Suburban Manual
Page 4 highlights
REMOTE KEYLESS ENTRY TRANSMITTER (KEY FOB)F Unlock Press to unlock the driver's door. Press again to unlock all doors. Lock Press to lock all doors. Remote Vehicle Start Press and release the Lock button and then press and hold the button until the turn signal lamps flash (about 4 seconds) to start the engine from outside the vehicle. After entering the vehicle, turn on the ignition. • During a remote start, the engine will run for 10 minutes. • Remote Start can be extended once by repeating the remote start procedure. • Press and hold the button until the parking lamps turn off to cancel a remote start. • The heated/cooled seatsF will turn on during a remote start (if selected in the Vehicle Settings menu) when outside temperatures warrant. Note: To change the remote lock, unlock, and remote start settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu. Note: Press and hold the Lock/Unlock buttons to automatically fold/unfold the power mirrorsF. To change the Auto Mirror Folding setting, go to Comfort and Convenience in the Vehicle Settings menu. LiftglassF Press twice to open the liftglass. Power LiftgateF Press twice to open or close the power liftgate. Vehicle Locator/Panic Alarm Press and release to locate your vehicle. The turn signal lamps will flash and the horn will sound. Press and hold to activate the alarm. The turn signal lamps will flash and the horn will sound until the button is pressed again or the ignition is turned on. See Keys, Doors and Windows in your Owner Manual. POWER LIFTGATEF Open/Close the Power Liftgate Press the Power Liftgate button on the RKE transmitter twice. Press the Power Liftgate knob on the overhead console. Press the touchpad (A) on the liftgate handle to open the liftgate. Press the button (B) next to the liftgate latch to close the liftgate. A B Programming the Liftgate Height 1. Turn the Power Liftgate knob to the 3/4 mode position. 2. Open the liftgate. 3. Adjust the liftgate manually to the desired height. 4. To save the setting, press and hold the button next to the liftgate latch for 3 seconds. The tail lamps will flash when the setting is saved. 4 F Optional equipment See Keys, Doors and Windows in your Owner Manual.