2005 Chrysler 300 Owner's Manual - Page 94

94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and release the Set (S) button on the memory seat switch, then press button 1 within 5 seconds. The radio display will show which memory position is being set. 3. A second memory profile can also be stored in the vehicle memory. Begin by pressing 2 on the memory switch for driver 2. Adjust settings to desired positions, press Set (S) button, then press button 2 within 5 seconds. Each time the Set and a numbered button are pressed, the old memory is erased, and a new one is stored. NOTE: Memory positions can be set without the vehicle in Park, but the vehicle must be in Park to recall a memory position. The Recall Memory with Remote Key Unlock feature must be turned on using the Electronic Vehicle Information Center (EVIC). Refer to Electronic Vehicle Information Center in this manual for details. Programming the Remote Keyless Transmitter for the Memory Feature Your remote transmitter can be programmed to return to a memory profile when the Unlock button is pressed and released. To program your transmitters, perform the following: 1. Insert the key into the ignition and turn the key to the Run position. 2. Select desired memory profile 1 or 2. 3. Press and release the Set (S) button on the memory seat switch, then press and release button 1 or 2. Memory Profile Set" (1or 2) will be displayed in the instrument cluster on vehicles equipped with the Electronic Vehicle Information Center. 4. Press and release the Lock button on the transmitter within 10 seconds. NOTE: Your transmitters may be unlinked to your memory settings by pressing the Unlock button on the transmitter in step 4 above. On vehicles equipped with an Electronic Vehicle Information Center (Optional), these functions can be selected at the EVIC using the Personal Settings (Customer Programmable Features). Refer to Electronic Vehicle Information Center - "Personal Settings" for details. When newly purchased (or replacement) transmitters are programmed into the vehicle, the first transmitter trained will be associated with memory