2008 Chrysler Crossfire Owner Manual - Page 23
2008 Chrysler Crossfire Manual
Page 23 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: Only replace the batteries in pairs. The system may have to be re-synchronized if the transmitter is without voltage for several minutes. To synchronize, aim the transmitter eye at the vehicle and briefly press either the LOCK or the UNLOCK button twice. Within approximately 30 seconds, insert the key in the ignition and turn it to the ON/RUN position. The remote control should once again be operational. SECURITY ALARM SYSTEM The Security Alarm system monitors the doors, rear liftgate/decklid, hood, and ignition for unauthorized operation. The Security Alarm system is automatically armed or disarmed with the remote control or any of your vehicle's keys by locking or unlocking the vehicle. The antitheft alarm is armed within approximately 10 seconds after locking the vehicle. A blinking light in the tow away alarm switch indicates that the alarm is armed. Once the Security Alarm system has been armed, the exterior vehicle lights will flash and an alarm will sound when a door, the rear liftgate/decklid, the hood, or glove compartment is opened, or if someone attempts to raise the vehicle for towing. The Security Alarm will flash the exterior lamps for approximately three minutes and sound an audible alarm for 30 seconds. The Security Alarm will stay on even if the activating element is immediately closed. Tow-Away Alarm The tow-away alarm switch is located on the console. To deactivate for towing or jacking up the vehicle, press and release the upper portion of the switch. Press and release the upper portion to activate it again. After the alarm system has been armed, the exterior vehicle lights will flash and an alarm will sound when someone attempts to raise the vehicle. The alarm will flash the exterior lamps for approximately three minutes 2