2008 Chrysler Sebring Owner Manual Convertible - Page 28

28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The vehicle must be equipped with an automatic transaxle to be equipped with Remote Start. How To Use Remote Start All of the following conditions must be met before the engine will remote start: • Gear selector lever in PARK. • Doors closed. • Hood closed. • Trunk closed. • Hazard switch off. • Brake switch inactive (brake pedal not pressed). • Ignition key removed from ignition switch. • Battery at an acceptable charge level. • RKE Panic button not pressed. To Enter Remote Start Mode Press and release the Remote Start button on the RKE transmitter twice. The engine will start and the vehicle will remain in the Remote Start mode for a 15 minute cycle. NOTE: • For security, power window operation is disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15 minute cycles) with the RKE transmitter. However, the ignition switch must be cycled to the ON position before you can repeat the start sequence for a third cycle. To Exit Remote Start Mode without Driving the Vehicle Allow the engine to run for the entire 15 minute cycle.