2009 Chrysler Aspen Owner Manual - Page 25
2009 Chrysler Aspen Manual
Page 25 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Horn Chirp Programming The horn chirp feature will be activated when shipped from the assembly plants. If desired, this feature can be disabled by following these procedures: • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Personal Settings (Customer Programmable Features)" under "Overhead Console with Electronic Vehicle Information Center (EVIC) - If Equipped" in Section 3. • For vehicles not equipped with the EVIC: 1. Press and hold the LOCK button on the transmitter. 2. After holding the LOCK button for four seconds, also press the PANIC button within six seconds. 3. Release both buttons at the same time. 4. To reactivate this feature, repeat the above steps. 5. Test the horn chirp feature while outside of the vehicle by pressing the LOCK button on the RKE transmitter with the ignition in the OFF position and the key removed. NOTE: Pressing the LOCK button on the transmitter while you are inside the vehicle will activate the security alarm. Opening a door with the security alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the security alarm. 6. If the desired programming was not achieved or to reactivate this feature, repeat the above steps. Flash Lights with Lock Programming • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Personal Settings (Customer Programmable Features)" under "Overhead Console with Electronic Vehicle Information Center (EVIC) - If Equipped" in Section 3. 2