2009 Chrysler PT Cruiser Owner Manual - Page 27
2009 Chrysler PT Cruiser Manual
Page 27 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 5. Turn the ignition to the ON position. Do not start the engine. 6. Press and hold the UNLOCK button on the RKE transmitter. 7. After holding the UNLOCK button for four seconds, also press the PANIC button within six seconds. 8. When a single chime is heard, release both buttons. The chime is an indication that you have successfully entered program mode. All RKE transmitters that are to be programmed must be done so within 60 seconds of when the chime was heard. 9. Using the RKE transmitter to be programmed, press and release both the LOCK and UNLOCK buttons, simultaneously. 10. A single chime will be heard. 11. Within four seconds of hearing the chime, press and release the UNLOCK button on the RKE transmitter. 12. A single chime will be heard. 13. Repeat steps 8 through 10 to program up to six additional RKE transmitters. 14. Turn the ignition to the OFF position. 15. Your vehicle will remain in program mode up to 60 seconds from when the original chime was heard. After 60 seconds, all programmed RKE transmitters function normally. NOTE: If you do not have a programmed RKE transmitter, contact your authorized dealer for details. General Information If your RKE transmitter fails to operate from a normal distance, check for these two conditions. 2