2012 Chrysler 200 Owner Manual Convertible - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 activated will cause the alarm to sound. Press the UN- 1. Press and hold the UNLOCK button on a programmed LOCK button to deactivate the Vehicle Security Alarm RKE transmitter for at least four seconds, but not longer than 10 seconds. Then, press and hold the LOCK button System. while still holding the UNLOCK button. Flash Lights With Lock The feature will cause the turn signal lights to flash when 2. Release both buttons at the same time. the doors are locked or unlocked with the RKE transmit3. Test the feature while outside of the vehicle by presster. This feature can be turned on or turned off. To change ing the LOCK/UNLOCK buttons on the RKE transmitter the current setting, proceed as follows: with the ignition in the LOCK position and the key • For vehicles equipped with the Electronic Vehicle removed. Information Center (EVIC), refer to "Electronic Vehicle 4. Repeat these steps if you want to return this feature to Information Center (EVIC)/Personal Settings its previous setting. (Customer-Programmable Features)" in "UnderstandNOTE: If there is no key in the ignition switch, pressing ing Your Instrument Panel" for further information. the LOCK button on the RKE transmitter while you are in • For vehicles not equipped with the EVIC, perform the the vehicle will activate the Vehicle Security Alarm. following procedure: Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm System. 2