2014 Chrysler 200 Owner Manual Convertible - Page 26

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transThe feature will cause the turn signal lights to flash when mitter with the ignition in the LOCK position and the the doors are locked or unlocked with the RKE transmitkey removed. ter. This feature can be turned on or turned off. To change the current setting, proceed as follows: 4. Repeat these steps if you want to return this feature to its previous setting. • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Electronic Vehicle NOTE: If there is no key in the ignition switch, pressing Information Center (EVIC)/Personal Settings the LOCK button on the RKE transmitter while you are in (Customer-Programmable Features)" in "Understand- the vehicle will activate the Vehicle Security Alarm. ing Your Instrument Panel" for further information. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK • For vehicles not equipped with the EVIC, perform the button to deactivate the Vehicle Security Alarm System. following procedure: Illuminated Approach - If Equipped 1. Press and hold the UNLOCK button on a programmed RKE transmitter for at least four seconds, but not This feature activates the headlights for up to 90 seconds longer than 10 seconds. Then, press and hold the when the doors are unlocked with the RKE transmitter. LOCK button while still holding the UNLOCK button. The time for this feature is programmable on vehicles equipped with the Electronic Vehicle Information Center 2. Release both buttons at the same time. Flash Lights With Lock