2005 Dodge Durango Owner's Manual - Page 16

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Within 10 seconds, cycle the key from the OFF position to the ON position four times; ending in the ON position ( Do not start the engine ). 5. Within 30 seconds, press the driver's door lock switch in the LOCK direction. 6. A single chime will be heard to indicate the feature has been disabled. 7. To re-activate this feature, repeat the above steps. 8. If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the above procedure. Auto Unlock Feature This feature unlocks all the doors of the vehicle when any door is opened (excluding liftgate). The following must be met: • The Automatic Door Lock feature must be enabled. • The doors of the vehicle must be locked automatically by the Automatic Door Lock feature. • The vehicle is in P (Park) and the ignition switch is in any key position. This feature will not operate if any of the conditions above are not met or following has occurred: • Any manual operation of a door lock switch has occurred. NOTE: This customer programmable feature is enabled when your vehicle is shipped from the assembly plant. Auto Unlock Feature Programming Customer Programming sequence to disable or enable: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (fastening the seat belt will cancel any chiming that may be confusing during this programming procedure).