2007 Dodge Nitro Owner's Manual - Page 356
2007 Dodge Nitro Manual
Page 356 highlights
356 MAINTAINING YOUR VEHICLE garden hose vertically down the face of the A/C condenser (if equipped) or the back of the radiator core. Check the engine cooling system hoses for brittle rubber, cracking, tears, cuts, and tightness of the connection at the coolant recovery bottle and radiator. Inspect the entire system for leaks. With the engine at normal operating temperature (but not running), check the cooling system pressure cap for proper vacuum sealing by draining a small amount of antifreeze/coolant from the radiator drain cock. If the cap is sealing properly, the antifreeze/coolant will begin to drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System - Drain, Flush, And Refill At the intervals shown in the appropriate "Maintenance Schedule," the system should be drained, flushed, and refilled. If the solution is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of old antifreeze/coolant solution. Discard old antifreeze/coolant solution according to recommended procedure. Selection Of Engine Coolant Use only the manufacturer's recommended antifreeze/ coolant, refer to Fluids, Lubricants, and Genuine Parts for correct antifreeze/coolant type.