2008 Dodge Charger Owner Manual - Page 241

UNDERSTANDING YOUR INSTRUMENT PANEL 241 is also directed to the front door windows through the side window demister grilles. • Floor Air flows through the floor outlets located under the instrument panel and into the rear seating area through vents under the front seats. • Bi-Level Air flows through the outlets located in the instrument panel and through the outlets located on the floor. Air flows through the registers in the back of the center console to the rear seat passengers. These registers can be closed to partially block airflow. • Panel Air flows through the outlets located in the instrument panel. Air flows through the registers in the back of the center console to the rear seat passengers. These registers can be closed to block airflow. • Recirculation Control The mode control knob also controls the recirculation feature. You can choose BiLevel Recirculation air outlets, Panel Recirculation air outlets, or a mix or both while in this mode. Normally, air enters from outside the vehicle. However, when in Recirculation mode air inside the vehicle is re-used. Use this mode to cool the inside of the vehicle rapidly. The Recirculation mode can also be used to temporarily block out outside odors, smoke, and dust. Air Conditioning Control Press this button to turn on and turn off the air conditioning. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the mode control. Press this button a second time to turn off the air conditioning. An LED in the button will illuminate when compressor operation is selected. 4