2008 Dodge Charger Owner Manual SRT8 - Page 186
2008 Dodge Charger Manual
Page 186 highlights
184 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display The compass readings indicate the direction the vehicle is facing. Press and release the COMPASS button to display one of eight comCOM- pass readings and the outside temperature. PASS Button Manual Compass Calibration If the compass appears erratic and the "CAL" message does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: 1. Turn the ignition switch ON. 2. Press and hold the COMPASS button for approximately two seconds. 3. Press the SCROLL button until "Calibrate Compass" displays in the EVIC. 4. Press and release the FUNCTION SELECT button to start the calibration. The message "CAL" will display in the EVIC. 5. Complete one or more 360 degree turns (in an area free from large metal or metallic objects) until the "CAL" message turns off. The compass will now function normally. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display "CAL" until the compass is calibrated. You may also calibrate the compass by completing one or more 360 degree turns (in an area free from large metal or metallic objects) until the "CAL" message displayed in the EVIC turns off. The compass will now function normally.