2008 Dodge Magnum Owner Manual - Page 32
2008 Dodge Magnum Manual
Page 32 highlights
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission is in "N" (Neutral) or "P" (Park). 4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Personal Settings (Customer Programmable Features)" under "Electronic Vehicle Information Center (EVIC)" in Section 4 of this manual for details. • For vehicles not equipped with the EVIC, performing the following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and then back to LOCK 4 times ending up in the LOCK position. 3. Depress the power door unlock switch to unlock the doors. 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.