2008 Dodge Ram 3500 Cab & Chassis Owner Manual - Page 303

STARTING AND OPERATING 303 operation and return to "standard vehicle operation" simply turn the up fitter provided on/off switch to the off position or press the "cancel" cruise switch. To operate the PTO via a remote switch the customer must make sure the above conditions are met. It is vital for proper operation that the PTO and remote have been installed correctly paying special attention to ensure the vehicle provided wiring has been connected properly. This is the responsibility of the installer of the PTO and switches/remote system. It is the responsibility of the PTO manufacturer to ensure that their electrical (switches and remote) system is compatible with the vehicle's electrical architecture and software functionality. Mobile Mode To operate the PTO in this mode the vehicle must meet the following conditions: • Dealer selected "mobile" mode activated via Dealer proprietary service tool • Upfitter provider (on/off) switch has been activated • Vehicle must be in "park" or "drive" position (vehicles equipped with automatic transmission) • Parking brake must not be applied • No vehicle, brake or clutch switch faults present • Vehicle must be running • PTO must be correctly installed using the vehicle provided circuits The customer may choose to use the PTO while the vehicle is moving. To do so the PTO function must be activated prior to taking the vehicle out of "park". This is accomplished by activating the up fitter provided PTO on/off switch. At this point the customer may place the vehicle in a forward or reverse gear and have PTO 5