2009 Dodge Journey Owner's Manual - Page 470

468 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the fog light housing and rotate the connector 1⁄4 turn clockwise to lock it in place. 5. Reinstall the front lower wheel well access panel and fasteners. Tail/Stop Light, Rear Turn Signal Light, Tail Light, Backup Light The taillights are a two-piece design. The tail/stop lights and rear turn signal lights are located in the rear corner body panels. The tail and backup lights are located in the liftgate. Changing the Tail/Stop Light or Rear Turn Signal Light 1. Open the liftgate. 2. Remove the two fasteners from the inboard side of the taillight housing. 3. Carefully insert a trim stick (plastic flat-blade tool) between the body panel and the outboard side of the taillight housing with one hand and grasp the flange on the inboard side of the taillight housing with the other hand. Use the trim stick and hand pressure together to disengage the taillight housing from the vehicle.