2010 Dodge Grand Caravan Cargo Owner Manual - Page 153
2010 Dodge Grand Caravan Cargo Manual
Page 153 highlights
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Press and release the memory SET (S) button located Easy Entry/Exit Seat on the driver's door. A chime will sound signaling that (Available with Memory Seat ONLY) This feature provides automatic driver seat positioning to you are in the memory set mode. enhance driver mobility when entering and exiting the 4. Within five seconds, press and release MEMORY vehicle. button 1 on the driver's door. A chime will sound The distance the driver seat moves depends on where signaling to you that the driver memory has been set. you have the driver seat positioned when you remove the 5. Within five seconds, press and release the UNLOCK key from the ignition switch. button on the RKE transmitter. A chime will sound signaling to you that the RKE transmitter link has been • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) successfully disabled. rearward if the driver seat position is greater than or To disable another RKE transmitter linked to either equal to 2.7 in (67.7 mm) forward of the rear stop. The Memory Position, repeat Steps 1 to 5 for each RKE seat will return to its previously set position when you transmitter. insert the key into the ignition switch and turn it out of NOTE: Once programmed, all RKE transmitters linked the LOCK position. to memory can be easily enabled or disabled at one time. Refer to "Electronic Vehicle Information Center (EVIC)/ • When you remove the key from the ignition switch the driver seat will move to a position 0.3 in (7.7 mm) Customer-Programmable FeaturesЉ in "Understanding forward of the rear stop if the driver seat position is Your Instrument Panel" for further information.