2010 Dodge Journey Owner Manual - Page 23

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Information Center (EVIC)/Personal Settings (Customer- • For vehicles not equipped with the EVIC, perform the Programmable Features)" in "Understanding Your Infollowing steps: strument Panel" for further information. 1. Press the LOCK button on a programmed RKE transTo Lock the Doors and Liftgate mitter for at least 4 seconds, but no longer than 10 secPress and release the LOCK button on the RKE transmit- onds. Then, press the PANIC button while still holding ter to lock all doors and liftgate. The turn signal lights the LOCK button. will flash and the horn will chirp to acknowledge the 2. Release both buttons at the same time. signal. 3. Test the feature while outside of the vehicle by pressSound Horn with Remote Key Lock ing the LOCK button on the RKE transmitter with the This feature will cause the horn to chirp when the doors ignition switch in the LOCK position and the Key Fob are locked with the RKE transmitter. This feature can be removed. turned on or turned off. To change the current setting, proceed as follows: 4. Repeat these steps if you want to return this feature to its previous setting. • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC)/Personal NOTE: Pressing the LOCK button on the RKE transmitSettings (Customer-Programmable Features)" in "Un- ter while you are in the vehicle will activate the Security derstanding Your Instrument Panel" for further information.