2010 Dodge Journey User Guide - Page 23

GETTING STARTED Auto Unlock Doors On Exit • To have all of the vehicle doors unlock when any door is opened: • Enter your vehicle and close all the doors. • Within 15 seconds, cycle the ignition switch from the LOCK position to the ON position a minimum of four times, ending in the LOCK position (do not start the engine). • Within 30 seconds, press the driver's door lock switch in the UNLOCK direction. A single chime will indicate that programming is complete. Auto Door Lock • To have the doors lock automatically when the vehicle's speed exceeds 15 mph (24 km/h): • The auto door lock feature can be enabled or disabled by your authorized dealer. See your authorized dealer for programming. Sound Horn With Lock • To turn the horn chirp on or off when the doors are locked: • Press the LOCK button for at least 4 seconds, but no longer than 10 seconds. Then, press the PANIC button while still holding the LOCK button. • Release both buttons at the same time. Flashing Lights With Lock • The turn signal lights flashing, when the doors are locked or unlocked, feature can be turned on or off. To turn this feature on or off: • Press and hold the UNLOCK button for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. • Release both buttons at the same time. 21