2011 Dodge Charger Owner Manual - Page 54

52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Slide the latch plate upward over the folded webbing. • ALR - Automatic Locking Retractor The folded webbing must enter the slot at the top of the If the passenger seating position is equipped with an latch plate. ALR and is being used for normal usage: 4. Continue to slide the latch plate up until it clears the Only pull the belt webbing out far enough to comfortably folded webbing. wrap around the occupant's mid-section so as to not Seat Belts In Passenger Seating Positions activate the ALR. If the ALR is activated, you will hear a The seat belts in the passenger seating positions are ratcheting sound as the belt retracts. Allow the webbing equipped with Automatic Locking Retractors (ALR) to retract completely in this case and then carefully pull which are used to secure a child restraint system. For out only the amount of webbing necessary to comfortadditional information, refer to "Installing Child Re- ably wrap around the occupant's mid-section. Slide the straints Using The Vehicle Seat Belt" under the "Child latch plate into the buckle until you hear a Љclick.Љ Restraints" section. The chart below defines the type of Automatic Locking Retractor Mode (ALR) - If feature for each seating position. Equipped Driver Center Passenger In this mode, the shoulder belt is automatically preFirst Row N/A N/A ALR locked. The belt will still retract to remove any slack in the shoulder belt. The Automatic Locking Mode is availSecond Row ALR ALR ALR able on all passenger-seating positions with a combina• N/A - Not Applicable tion lap/shoulder belt. Use the Automatic Locking Mode