2013 Dodge Dart User Guide - Page 27

OPERATING YOUR VEHICLE Front Wipers Intermittent, Low And High Operation • Rotate the end of the lever to the first detent position for one of four intermittent settings, the second detent for low wiper operation and the third detent for high wiper operation. Mist • Rotate the end of the lever downward when a single wipe is desired. NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be activated in order to spray the windshield with washer fluid. Washer Operation • Push the end of the lever inward and hold for as long as spray is desired. Rain Sensing Wipers • This feature senses moisture on the vehicle's windshield and automatically activates the wipers for the driver when the switch is in the intermittent position. Rotate the end of the lever to one of four settings to activate this feature and adjust sensitivity. • Rain Sensing can be turned on and off using the Uconnect® System, refer to the Owner's Manual on the DVD for further details. High Beam Operation • Push the lever forward to activate the high beams. Pull the lever toward you for flash to pass. NOTE: For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight glare and as a courtesy to other motorists. 25