2013 Dodge Grand Caravan Cargo Owner Manual - Page 220

218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Press and release the memory SET (S) button located Easy Entry/Exit Seat (Available With Memory Seat on the driver's door. A chime will sound signaling that ONLY) you are in the memory set mode. This feature provides automatic driver seat positioning to 4. Within five seconds, press and release MEMORY enhance driver mobility when entering and exiting the button 1 on the driver's door. A chime will sound vehicle. signaling to you that the driver memory has been set. The distance the driver seat moves depends on where 5. Within five seconds, press and release the UNLOCK you have the driver seat positioned when you remove the button on the RKE transmitter. A chime will sound key from the ignition switch. signaling to you that the RKE transmitter link has been • When you remove the key from the ignition switch, successfully disabled. the driver seat will move about 2.4 in (60 mm) rearward if the driver seat position is greater than or equal To disable another RKE transmitter linked to either to 2.7 in (67.7 mm) forward of the rear stop. The seat Memory Position, repeat Steps 1 to 5 for each RKE will return to its previously set position when you transmitter. insert the key into the ignition switch and turn it out of NOTE: Once programmed, all RKE transmitters linked to the LOCK position. memory can be easily enabled or disabled at one time. Refer to "Electronic Vehicle Information Center (EVIC)/ Customer-Programmable FeaturesЉ in "Understanding Your Instrument Panel" for further information.