2013 Dodge Grand Caravan Passenger User Guide - Page 33

OPERATING YOUR VEHICLE BLIND SPOT MONITORING WITH REAR CROSS PATH • The Blind Spot Monitoring (BSM) system uses two radar-based sensors, located inside the rear bumper fascia, to detect Highway licensable vehicles (automobiles, trucks, motorcycles etc.) that enter the blind spot zones from the rear/front/side of the vehicle. • The Blind Spot Monitoring (BSM) system warning light, located in the outside mirrors, will illuminate if a vehicle moves into a blind spot zone. • The BSM system can also be configured to sound an audible (chime) alert and mute the radio to notify you of objects that have entered the detection zones. • Refer to your Owner's Manual on the DVD for further details. POWER SLIDING SIDE DOORS Automatic/Manual Operation • The power sliding door may be opened or closed manually or by using the buttons on the Key Fob, overhead console switch, or rear door switch. • Pulling the inside or outside power sliding door handle will also power open the power sliding doors. NOTE: When the power sliding door master lock switch is in the OFF position, the power sliding side door may not be opened or closed by pressing the switch located on the b-pillar trim panel, just in the front of the sliding door or activating the inside power sliding door handle. Sliding Side Door Child Protection Lock • When this system is engaged, the inside manual door handle will not open the sliding door even though the inside door lock is in the unlocked position. • To engage the Child Protection Door Lock, open the sliding side door. Slide the child protection door lock control, located on the rear of the sliding door, inward (toward the vehicle) to engage. • Repeat these steps on the opposite sliding door. 31