2014 Dodge Charger Owner Manual SRT - Page 95

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR) 4. Pull on the webbing to make the lap portion tight against the child seat. 1. Place the child seat in the center of the seating 5. To lock the seat belt, pull down on the shoulder part of position. For some second row seats, you may need to the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved forward and back into the retractor. As the webbing retracts, you will hear a clicking sound. This means the seat belt is rearward in the vehicle, you may wish to move it to its rear-most position to make room for the child seat. now in the Automatic Locking mode. You may also move the front seat forward to allow 6. Try to pull the webbing out of the retractor. If it is more room for the car seat. locked, you should not be able to pull out any webbing. If the retractor is not locked, repeat step 5. 2. Pull enough of the seat belt webbing from the retractor to pass it through the belt path of the child restraint. 7. Finally, pull up on any excess webbing to tighten the Do not twist the belt webbing in the belt path. lap portion around the child restraint while you push the child restraint rearward and downward into the 3. Slide the latch plate into the buckle until you hear a "click". vehicle seat. 2