Home » Ducati Manuals » 2010 Ducati Monster 796 » Manual Viewer

2010 Ducati Monster 796 Owners Manual - Page 66

2010 Ducati Monster 796 Manual

Get 2010 Ducati Monster 796 PDF manuals and user guides

View all 2010 Ducati Monster 796 manuals

Page 66 highlights

Throughout the running-in period, be careful to stick to the recommended maintenance schedule and periodic service intervals indicated in the warranty booklet. Failure to comply with these rules will release Ducati Motor Holding S.p.A. from any liability whatsoever for resulting engine damage or shorter engine life. Keeping to the running-in recommendations will ensure longer engine life and reduce the need for overhauls and retuning. Important CONTROLS Operate the brake, clutch, gearchange and throttle controls (lever, pedal and twistgrip) and check that they function correctly. LIGHTS AND INDICATORS Make sure lights, indicators and horn work properly. Replace any burnt-out bulbs (page 98). KEY-OPERATED LOCKS Check that the fuel filler cap and the seat are locked. STAND Make sure side stand operates smoothly and is in the correct position (page 62). E Pre-ride checks Failure to carry out these checks before starting may result in damage to the motorcycle and injury to rider. Before starting, check the following points: FUEL LEVEL IN THE TANK Check fuel level in the tank. Fill tank if needed (page 71). ENGINE OIL LEVEL Check the oil level in the sump through the sight glass. Top up if needed (page 103). BRAKE AND CLUTCH FLUID Check the fluid levels in the respective reservoirs. TYRE CONDITION Check tyre pressure and condition (page 101). ABS light (for Monster 796 ABS only) After key-on, the ABS light (10, fig. 4) remains on when the vehicle speed exceeds 5 km/h; the light turns off to indicate that the ABS system is functioning properly. Warning In case of malfunction, do not ride the motorcycle and contact a Ducati Dealer or authorised Service Centre. Warning 65

Section	Page
General indications (null) Warranty (null) Symbols (null) Useful road safety information (null) Riding with a full load (null) Identification data (null) Instrument panel (Dashboard) (null) Instrument panel (null) LCD unit functions (null) LCD - How to set/display parameters (null) Total distance covered indicator: “Odometer“ (null) “Speed” indicator (null) “TRIP” meter (null) Distance travelled on fuel reserve: “TRIP FUEL“ (null) Clock display indicator (null) Air temperature indicator (null) Oil temperature indicator (null) Service indicator (null) Battery voltage indicator (BATT) (null) Engine idle RPM setting (RPM) (null) Backlighting adjustment (null) LAP time display function (null) Stored data display (LAP Memory) (null) DDA data acquisition (null) Erase DDA (null) ABS disabling function (for Monster 796 ABS only) (null) Clock setting function (null) Instrument panel diagnostics (null) Headlight “smart” auto-off (null) Intelligent headlight switch-on (null) The immobilizer system (null) Code card (null) Immobilizer override procedure (null) Operation (null) Duplicate keys (null) Controls (null) Position of motorcycle controls (null) Ignition switch and steering lock (null) Left-hand handlebar switch (null) Clutch lever (null) Right-hand handlebar switch (null) Throttle twistgrip (null) Front brake lever (null) Rear brake pedal (fig. 42) (null) Gear change pedal (fig. 43) (null) Adjusting the position of the gearchange and rear brake pedals (null) Main components and devices (null) Position on the vehicle (null) Tank filler plug (null) Seat lock and helmet holder (null) Side stand (null) Rear shock absorber adjusters (null) Riding the motorcycle (null) Running-in recommendations (null) Pre-ride checks (null) Starting the engine (null) Moving off (null) Braking (null) Stopping the motorcycle (fig. 57) (null) Refuelling (fig. 58) (null) Parking (null) Tool kit and accessories (null) Main maintenance operations (null) Changing the air filter (null) Checking brake and clutch fluid levels (fig. 61) (null) Checking brake pads for wear (fig. 62) (null) Lubricating cables and linkages (null) Throttle cable adjustment (fig. 64) (null) Charging and maintenance of the battery during winter storage (null) Removal of the battery (null) Refitting the battery (null) Tensioning the drive chain (null) Lubricating the drive chain (null) Changing bulbs (null) Beam setting (fig. 101) (null) Tyres (null) Checking the engine oil level (null) Cleaning and replacing the spark plugs (null) General cleaning (null) Storing the motorcycle (null) Important notes (null) Maintenance (null) Programmed maintenance plan: operations to be carried out by the dealer (null) Programmed maintenance plan: operations to be carried out by the customer (null) Technical data (null) Overall dimensions (mm) (null) Weights (null) Engine (null) Timing system (null) Performance data (null) Spark plugs (null) Fuel system (null) Brakes (null) Transmission (null) Frame (null) Wheels (null) Tyres (null) Suspension (null) Exhaust system (null) Colour schemes (null) Electric system (null) Routine maintenance record (null) For United States of America Version Only (null) Reporting of safety defects (null) Safety warnings (null) Noise emission warranty (null) Noise and exhaust emission control system information (null) Tampering warning (null) Riding safety (null) Protective apparel (null) Vehicle identification number (VIN) (null) Label location (null) California emission control warranty statement Your warranty rights and obligations (null) Manufacturer’s warranty coverage (null) Owner's warranty responsibilities: (null) California evaporation emission system (fig. C) (null) Ducati limited warranty on emission control system (null) Routine Maintenance Record (null) UM_M796ABS_11_ENG.pdf (null) General indications (null) Warranty (null) Symbols (null) Useful road safety information (null) Riding with a full load (null) Identification data (null) Instrument panel (Dashboard) (null) Instrument panel (null) LCD unit functions (null) LCD - How to set/display parameters (null) Total distance covered indicator: “Odometer“ (null) “Speed” indicator (null) “TRIP” meter (null) Distance travelled on fuel reserve: “TRIP FUEL“ (null) Clock display indicator (null) Oil temperature indicator (null) Service indicator (null) Battery voltage indicator (BATT) (null) Engine idle RPM setting (RPM) (null) Backlighting adjustment (null) LAP time display function (null) Stored data display (LAP Memory) (null) DDA data acquisition (null) Erase DDA (null) ABS disabling function (for Monster 796 ABS only) (null) Clock setting function (null) Instrument panel diagnostics (null) Headlight “smart” auto-off (null) Intelligent headlight switch-on (null) The immobilizer system (null) Code card (null) Immobilizer override procedure (null) Operation (null) Duplicate keys (null) Controls (null) Position of motorcycle controls (null) Ignition switch and steering lock (null) Left-hand handlebar switch (null) Clutch lever (null) Right-hand handlebar switch (null) Throttle twistgrip (null) Front brake lever (null) Rear brake pedal (fig. 41) (null) Gear change pedal (fig. 42) (null) Adjusting the position of the gearchange and rear brake pedals (null) Main components and devices (null) Position on the vehicle (null) Tank filler plug (null) Seat lock and helmet holder (null) Side stand (null) Rear shock absorber adjusters (null) Riding the motorcycle (null) Running-in recommendations (null) Pre-ride checks (null) Starting the engine (null) Moving off (null) Braking (null) Stopping the motorcycle (fig. 56) (null) Refuelling (fig. 57) (null) Parking (null) Tool kit and accessories (null) Main maintenance operations (null) Changing the air filter (null) Checking brake and clutch fluid levels (fig. 60) (null) Checking brake pads for wear (fig. 61) (null) Lubricating cables and linkages (null) Throttle cable adjustment (fig. 63) (null) Charging and maintenance of the battery during winter storage (null) Removal of the battery (null) Refitting the battery (null) Tensioning the drive chain (null) Lubricating the drive chain (null) Changing bulbs (null) Beam setting (fig. 100) (null) Tyres (null) Checking the engine oil level (null) Cleaning and replacing the spark plugs (null) General cleaning (null) Storing the motorcycle (null) Important notes (null) Maintenance (null) Programmed maintenance plan: operations to be carried out by the dealer (null) Programmed maintenance plan: operations to be carried out by the customer (null) Technical data (null) Overall dimensions (mm) (null) Weights (null) Engine (null) Timing system (null) Performance data (null) Spark plugs (null) Fuel system (null) Brakes (null) Transmission (null) Frame (null) Wheels (null) Tyres (null) Suspension (null) Exhaust system (null) Colour schemes (null) Electric system (null) Routine maintenance record (null) For United States of America Version Only (null) Reporting of safety defects (null) Safety warnings (null) Noise emission warranty (null) Noise and exhaust emission control system information (null) Tampering warning (null) Riding safety (null) Protective apparel (null) Vehicle identification number (VIN) (null) Label location (null) California emission control warranty statement Your warranty rights and obligations (null) Manufacturer’s warranty coverage (null) Owner's warranty responsibilities: (null) California evaporation emission system (fig. C) (null) Ducati limited warranty on emission control system (null) Routine Maintenance Record (null) UM_M796ABS_11_ENG.pdf (null) General indications (null) Warranty (null) Symbols (null) Useful road safety information (null) Riding with a full load (null) Identification data (null) Service menu - units of measurement (UNIT SET) (null) Instrument panel (Dashboard) (null) Instrument panel (null) LCD unit functions (null) LCD - How to set/display parameters (null) Total distance covered indicator: “Odometer“ (null) “Speed” indicator (null) “TRIP” meter (null) Distance travelled on fuel reserve: “TRIP FUEL“ (null) Clock display indicator (null) Oil temperature indicator (null) Service indicator (null) Battery voltage indicator (BATT) (null) Engine idle RPM setting (RPM) (null) Backlighting adjustment (null) LAP time display function (null) Stored data display (LAP Memory) (null) DDA data acquisition (null) Erase DDA (null) ABS disabling function (for Monster 796 ABS only) (null) Clock setting function (null) Instrument panel diagnostics (null) Headlight “smart” auto-off (null) Intelligent headlight switch-on (null) The immobilizer system (null) Code card (null) Immobilizer override procedure (null) Operation (null) Duplicate keys (null) Controls (null) Position of motorcycle controls (null) Ignition switch and steering lock (null) Left-hand handlebar switch (null) Clutch lever (null) Right-hand handlebar switch (null) Throttle twistgrip (null) Front brake lever (null) Rear brake pedal (fig. 42) (null) Gear change pedal (fig. 43) (null) Adjusting the position of the gearchange and rear brake pedals (null) Main components and devices (null) Position on the vehicle (null) Tank filler plug (null) Seat lock and helmet holder (null) Side stand (null) Rear shock absorber adjusters (null) Riding the motorcycle (null) Running-in recommendations (null) Pre-ride checks (null) Starting the engine (null) Moving off (null) Braking (null) Stopping the motorcycle (fig. 57) (null) Refuelling (fig. 58) (null) Parking (null) Tool kit and accessories (null) Main maintenance operations (null) Changing the air filter (null) Checking brake and clutch fluid levels (fig. 61) (null) Checking brake pads for wear (fig. 62) (null) Lubricating cables and linkages (null) Throttle cable adjustment (fig. 64) (null) Charging and maintenance of the battery during winter storage (null) Removal of the battery (null) Refitting the battery (null) Tensioning the drive chain (null) Lubricating the drive chain (null) Changing bulbs (null) Beam setting (fig. 101) (null) Tyres (null) Checking the engine oil level (null) Cleaning and replacing the spark plugs (null) General cleaning (null) Storing the motorcycle (null) Important notes (null) Maintenance (null) Programmed maintenance plan: operations to be carried out by the dealer (null) Programmed maintenance plan: operations to be carried out by the customer (null) Technical data (null) Overall dimensions (mm) (null) Weights (null) Engine (null) Timing system (null) Performance data (null) Spark plugs (null) Fuel system (null) Brakes (null) Transmission (null) Frame (null) Wheels (null) Tyres (null) Suspension (null) Exhaust system (null) Colour schemes (null) Electric system (null) Routine maintenance record (null) For United States of America Version Only (null) Reporting of safety defects (null) Safety warnings (null) Noise emission warranty (null) Noise and exhaust emission control system information (null) Tampering warning (null) Riding safety (null) Protective apparel (null) Vehicle identification number (VIN) (null) Label location (null) California emission control warranty statement Your warranty rights and obligations (null) Manufacturer’s warranty coverage (null) Owner's warranty responsibilities: (null) California evaporation emission system (fig. C) (null) Ducati limited warranty on emission control system (null) Routine Maintenance Record (null) UM_M796ABS_11_ENG 1.pdf (null) General indications	8
Warranty	8
Symbols	8
Useful road safety information	9
Riding with a full load	10
Identification data	11
Service menu - units of measurement (UNIT SET)	50
Controls	52
Position of motorcycle controls	52
Ignition switch and steering lock	53
Left-hand handlebar switch	54
Clutch lever	55
Right-hand handlebar switch	56
Throttle twistgrip	57
Front brake lever	57
Rear brake pedal (fig. 42)	58
Gear change pedal (fig. 43)	58
Adjusting the position of the gearchange and rear brake pedals	59
Main components and devices	60
Position on the vehicle	60
Tank filler plug	61
Seat lock and helmet holder	62
Side stand	63
Rear shock absorber adjusters	64
Riding the motorcycle	65
Running-in recommendations	65
Pre-ride checks	66
Starting the engine	68
Moving off	70
Braking	71
Stopping the motorcycle (fig. 57)	72
Refuelling (fig. 58)	72
Parking	73
Tool kit and accessories	74
Main maintenance operations	75
Changing the air filter	75
Checking brake and clutch fluid levels (fig. 61)	75
Checking brake pads for wear (fig. 62)	76
Lubricating cables and linkages	77
Throttle cable adjustment (fig. 64)	78
Charging and maintenance of the battery during winter storage	78
Removal of the battery	79
Refitting the battery	86
Tensioning the drive chain	97
Lubricating the drive chain	98
Changing bulbs	99
Beam setting (fig. 101)	100
Tyres	102
Checking the engine oil level	104
Cleaning and replacing the spark plugs	105
General cleaning	106
Storing the motorcycle	107
Important notes	107
Maintenance	108
Programmed maintenance plan: operations to be carried out by the dealer	108
Programmed maintenance plan: operations to be carried out by the customer	111
Technical data	112
Overall dimensions (mm)	112
Weights	112
Engine	114
Timing system	114
Performance data	115
Spark plugs	115
Fuel system	115
Brakes	116
Transmission	117
Frame	118
Wheels	118
Tyres	118
Suspension	118
Exhaust system	119
Colour schemes	119
Electric system	119
Routine maintenance record	125
For United States of America Version Only	126
Reporting of safety defects	126
Safety warnings	126
Noise emission warranty	126
Noise and exhaust emission control system information	126
Tampering warning	127
Riding safety	128
Protective apparel	129
Vehicle identification number (VIN)	129
Label location	130
California emission control warranty statement Your warranty rights and obligations	132
Manufacturer’s warranty coverage	132
Owner's warranty responsibilities:	132
California evaporation emission system (fig. C)	133
Ducati limited warranty on emission control system	133