1996 Ford Explorer Scheduled Maintenance Guide 1st Printing - Page 21

1996 Ford Explorer Manual

Page 21 highlights

100,000 MILES (160,000 Kilometers) u Change engine oil and replace oil filter. u Replace spark plugs (4.0L only). u All rear axle lube quantities must be replaced every 100,000 miles (160,000 axle has been submerged in Otherwise, the lube should or changed unless a leak is repair required. km) or if the water. not be checked suspected or 105,000 MILES (168,000 Kilometers) u Change engine oil and replace oil filter. u Inspect engine cooling system, hoses, and clamps; and check coolant strength every 15,000 miles (24,000 km) or 12 months. u Rotate tires and adjust air pressure. (1) u Check clutch reservoir fluid level. u Lubricate transfer case shift lever pivot bolt and control rod connecting pins (4x4). shift linkage. u Inspect and lubricate automatic transmission u Lubricate steering linkage suspension, driveshaft U-joint if equipped with grease fittings and lubricate slip yoke (if equipped). slide rails. u Inspect disc brake system, lubricate caliper Normal Schedule 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

Normal Schedule
21
100,000 MILES (160,000 Kilometers)
Change engine oil and replace oil filter.
Replace spark plugs (4.0L only)
.
All rear axle lube quantities must be replaced
every 100,000 miles (160,000 km) or if the
axle has been submerged in water.
Otherwise, the lube should not be checked
or changed unless a leak is suspected or
repair required.
105,000 MILES (168,000 Kilometers)
Change engine oil and replace oil filter.
Inspect engine cooling system, hoses, and clamps;
and check coolant strength every 15,000 miles
(24,000 km) or 12 months.
Rotate tires and adjust air pressure. (1)
Check clutch reservoir fluid level.
Lubricate transfer case shift lever pivot bolt
and control rod connecting pins (4x4).
Inspect and lubricate automatic transmission
shift linkage.
Lubricate steering linkage suspension,
driveshaft U-joint if equipped with grease
fittings and lubricate slip yoke (if equipped).
Inspect disc brake system, lubricate caliper
slide rails.