1997 Ford Taurus Owner Guide 1st Printing - Page 147
1997 Ford Taurus Manual
Page 147 highlights
Maintenance and care Function Rear window switch (wagon) Trade Number Go to Ford wiper/washer authorized dealer Headlamps To remove the headlamp bulb: 1. Make sure headlamp switch is in OFF position, then open the hood. If you are replacing the driver side headlamp, unclip the electronic module on the right side of the battery and move it out of the way. 2. Remove the electrical connector from the bulb by pulling the connector. 3. Remove the bulb retaining ring by rotating it counterclockwise (when viewed from the rear) about an eighth of a turn to free it from the bulb socket, and by sliding the ring off the plastic base. Keep the ring because it will be used again to retain the new bulb. 4. Remove the old bulb from its socket by gently pulling it straight back out of the socket. Do not turn the bulb while you are removing it. To install the new bulb: 148
![](/manual_guide/autos/Ford-1997-Taurus-Owner-Guide-1st-Printing-e3e101/147.png)