1998 Ford Taurus Owner Guide 1st Printing - Page 23

Controls and features Automatic operation Press AUTO and select the desired temperature. The selected temperature and the word AUTO will appear in the display window. The EATC system will either heat or cool to achieve the selected temperature. The system will automatically determine fan speed, airflow location and if fresh outside air or recirculated air is required. Fan speed remains automatic unless the fan speed control is pressed. When in AUTO and weather conditions require heat, air will be sent to the floor. However, if the engine is not warm enough to provide heat, the fan will be at a low speed and the air will be directed to the windshield. In 3½ minutes or less, the fan speed will start to increase and the airflow location will change to the floor area. If unusual conditions exist (i.e.-window fogging, etc.), the manual override controls allow you to select airflow locations and the fan control allows you to adjust fan speed as necessary. Temperature selection The display window AUTO indicates the selected temperature, function (AUTO or one of the override controls) and • FAN manual control of fan speed ( ) if automatic fan speed is not desired. To control the temperature, select any - + temperature between F-DEF 18°C (65°F) and 29°C R-DEF (85°F) by pressing the temperature control. F • • - TEMP + 23