2001 Ford Mustang Owner Guide 3rd Printing - Page 209

Capacities and specifications Item Automatic transmission fluid 3.8L Manual transmission fluid 4.6L Manual transmission fluid Ford part name Motorcraft MERCON௡V ATF Ford part number XT-5-QM Ford specification MERCON௡V MERCON௡ N/A ESE-M1C171-A 2 Motorcraft MERCON௡ ATF Mobil 1 Synthetic௡ ATF XT-2-QDX N/A D7AZ-19A331-A (Motorcraft WA-10) C9AZ-19550-AC Disc brake caliper Silicone Brake rails Caliper Grease and Dielectric Compound Windshield washer fluid Ultra-clear Windshield Washer Concentrate ESR-M17P5-A 1 Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok axles. Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle has been submerged in water. 2 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON௡ and MERCON௡ V are not interchangeable. DO NOT mix MERCON௡ and MERCON௡ V. Refer to your scheduled maintenance guide to determine the correct service interval. ENGINE DATA Engine Cubic inches Required fuel Firing order Spark plug gap Ignition system Compression ratio 3.8L OHV V6 engine 232 87 octane 1-4-2-5-3-6 1.3-1.4 mm (0.052-00.056 inch) EDIS 9.4:1 4.6L SOHC V8 engine 281 87 octane 1-3-7-2-6-5-4-8 1.3-1.4 mm (0.052-00.056 inch) Coil on plug 9.4:1 209