2002 Ford Escape Owner's Manual - Page 267

Maintenance and Specifications Fluid Engine coolant 4 Ford Part Name Motorcraft Premium Engine Coolant (green colored) or Motorcraft Premium Gold Engine Coolant (yellow-colored) Application 2.0L I4 Zetec engine with manual transaxle 2.0L I4 Zetec engine with automatic transaxle 3.0L V6 Duratec engine with automatic transaxle 4X4 Capacity 5.0L (5.3 quarts) 6.0L (6.3 quarts) 10.0L (10.6 quarts) Rear axle lubricant Windshield washer fluid Motorcraft SAE 80W-90 Premium Rear Axle Lubricant Ultra-Clear Windshield Washer Concentrate 1.4L (2.96 pints) 5 All 2.6L (2.7 quarts) Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON and MERCON V are not interchangeable. DO NOT mix MERCON and MERCON V. Refer to your scheduled maintenance guide to determine the correct service interval. 2 Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 4 Add the coolant type originally equipped in your vehicle. 5 Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole. 1 267