2002 Ford Mustang Owner Guide 3rd Printing - Page 242
2002 Ford Mustang Manual
Page 242 highlights
Maintenance and Specifications Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok axles. Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle has been submerged in water. 2 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON and MERCON V are not interchangeable. DO NOT mix MERCON and MERCON V. Refer to your scheduled maintenance guide to determine the correct service interval. ENGINE DATA Engine Cubic inches Required fuel Firing order Spark plug gap 3.8L OHV V6 engine 232 87 octane 1-4-2-5-3-6 1.3-1.4 mm (0.052-00.056 inch) EDIS 9.4:1 4.6L SOHC V8 engine 281 87 octane 1-3-7-2-6-5-4-8 1.3-1.4 mm (0.052-00.056 inch) Coil on plug 9.4:1 1 Ignition system Compression ratio VEHICLE DIMENSIONS Vehicle dimensions (1) Overall length (2) Overall width (3) Overall height (4) Wheelbase (5) Track - Front (5) Track - Rear 1 2 Coupe mm (in) 4653.3 1856.7 1348.7 2573.0 1534.2 1539.2 (183.2) (73.1) (53.1) (101.3) (60.4) 1 (60.6) 2 Convertible mm (in) 4653.3 (183.2) 1856.7 (73.1) 1351.3 (53.2) 2573.0 (101.3) 1534.2 (60.4) 1 1539.2 (60.6) 2 1521.5 mm (59.9 in) for Mustang GT 1526.5 mm (60.1 in) for Mustang GT 242