2003 Ford Explorer Sport Owner Guide 5th Printing - Page 88
2003 Ford Explorer Sport Manual
Page 88 highlights
Locks and Security • The factory set code will work even if you have set your own personal code. • If you set a second personal code it will erase your first personal code. Erasing personal code 1. Enter the factory set 5-digit code. 2. Press and hold the 1 • 2 for two seconds. This must be done within five seconds of completing step 1. Your personal code is now erased and only the factory set 5-digit code will work. Anti-scan feature If the wrong code has been entered 7 times (35 consecutive button presses), the keypad will go into an anti-scan mode. This mode disables the keypad for one minute and the keypad lamp will flash. The anti-scan feature will turn off after: • one minute of keypad inactivity. • pressing the UNLOCK control on the remote entry transmitter. • the ignition is turned to the ON position. • a key turned to the UNLOCK position on the driver's door (if the vehicle is equipped with a perimeter anti-theft system). Unlocking and locking the doors, liftgate and liftgate window using keyless entry To unlock the driver's door, enter the factory set 5-digit code or your personal code. Each number must be pressed within five seconds of each other. The interior lamps will illuminate. To unlock all doors and liftgate, press the 3 • 4 control within five seconds. To open the liftgate window, press the 5 • 6 control within five seconds. To lock all doors, liftgate and liftgate window, press the 7 • 8 and the 9 • 0 at the same time. Note: The driver's door must be closed. You do not need to enter the keypad code first. Autolock This feature will automatically lock all the doors when: • all the doors are closed, 88 2003 Explorer (exp) Owners Guide (post-2002-fmt) USA English (fus)