2004 Ford Escape Owner's Manual - Page 41

Lights 6. Without turning, carefully pull bulb out of headlamp assembly. Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb only by its metal base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. Note: The bulb's metal base gets very hot during headlamp operation. Be sure the bulb base is cool before handling. If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. 7. Insert the glass end of the new bulb into the headlamp assembly. When the bulb's three metal tabs are aligned with the grooves in the plastic base, push the bulb into the lamp assembly until the bulb's metal base contacts the plastic base. 8. Rotate the retainer spring over the bulb metal base and secure it on the bulb hooks. 9. Install rubber boot on the lamp assembly. Be sure to press firmly around the perimeter of the boot and around the bulb to ensure the proper seal of the bulb. 10. Connect the electrical connector into the rear of the bulb until it "snaps." 41 2004 Escape (204) Owners Guide (post-2002-fmt) USA English (fus)