2004 Ford Excursion Owner Guide 2nd Printing (Spanish) - Page 378
2004 Ford Excursion Manual
Page 378 highlights
Locks and Security Erasing personal code 1. Enter the factory set 5-digit code. 2. Within five seconds, press the 1 • 2 on the keypad and release. 3. Press and hold the 1 • 2 for two seconds. This must be done within five seconds of completing step 2. Your personal code is now erased and only the factory set 5-digit code will work. Anti-scan feature If an incorrect code has been entered 7 times (35 consecutive button presses), the keypad will go into an anti-scan mode. This mode disables the keypad for one minute and the keypad lamp will flash during this time. The anti-scan feature will turn off after: • one minute of keypad inactivity. • pressing the control on the remote entry transmitter. • the ignition is turned to the 4 (ON) position. Unlocking and locking the doors using keyless entry To unlock the driver's door, enter the factory set 5-digit code or your personal code. Each number must be pressed within five seconds of each other. The interior lamps will illuminate after entering a valid keypad entry code. To unlock all doors, press the 3 • 4 control within five seconds. To lock all doors, press the 7 • 8 and the 9 • 0 at the same time. You do not need to enter the keypad code first. Note: The interior lamps will turn off. Autolock (if equipped) This feature automatically locks all vehicle doors when the following conditions are met: • the ignition key is in the 4 (ON) position, • all the doors are closed, • the brake is pressed before reaching 8 km/h (5 mph), and • the vehicle is traveling more than 8 km/h (5 mph). Relock The autolock feature repeats when the following conditions are met: • the vehicle's speed is less than 8 km/h (5 mph), 88