2004 Ford F250 Diesel Supplement 2nd Printing - Page 37

2004 Ford F250 Manual

Page 37 highlights

Maintenance and Specifications • F-Super Duty/Excursion • E-Series 3. Remove the drain plug, using a 6mm hex drive, by turning it counterclockwise. Allow the HFCM/FCM to drain for approximately 25 seconds or until clean fuel is observed. Install the drain plug by turning it clockwise until it is firmly seated. 4. Verify that the drain plug is closed and sealed, then remove the container from under the vehicle. 5. Restart the engine and check WATER IN FUEL indicator light; it should not be illuminated. If it continues to illuminate, have the fuel system checked and repaired. Removal - HFCM filter (F-Super Duty/Excursion) 1. Remove the fuel filter cap by turning counterclockwise. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

F-Super Duty/Excursion
E-Series
3. Remove the drain plug, using a 6mm hex drive, by turning it
counterclockwise. Allow the HFCM/FCM to drain for approximately 25
seconds or until clean fuel is observed. Install the drain plug by turning
it clockwise until it is firmly seated.
4. Verify that the drain plug is closed and sealed, then remove the
container from under the vehicle.
5. Restart the engine and check WATER IN FUEL indicator light; it
should not be illuminated. If it continues to illuminate, have the fuel
system checked and repaired.
Removal - HFCM filter (F-Super Duty/Excursion)
1. Remove the fuel filter cap by
turning counterclockwise.
Maintenance and Specifications
37