2005 Ford Explorer Scheduled Maintenance Guide 4th Printing - Page 19
2005 Ford Explorer Manual
Page 19 highlights
NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 60,000 miles ❑ Change engine oil and replace oil filter. ❑ Inspect tires for wear and rotate. ❑ Inspect brake pads/shoes/rotors/drums, brake lines & hoses, and parking brake system. Inspect wheel ends for endplay and noise. Inspect engine cooling system and hoses. Inspect exhaust system and heat shields. Inspect steering linkage, ball joints, suspension and, if equipped, half shafts, driveshaft and U-joints. Replace engine air filter. Replace fuel filter (see page 47). Replace cabin air filter, if equipped. Change automatic transmission fluid on vehicles equipped with the Torqshift and 4R100 transmissions. Replace the remote filter element on the vehicles equipped with the Torqshift transmission. Inspect automatic transmission/transaxle fluid level on all other vehicles, if equipped with dipstick. Consult your dealer for your particular requirements. Change automatic transaxle fluid and filter on all vehicles equipped with CVT. Replace climate-controlled seat filters if equipped (Navigator, Expedition and Aviator). Lubricate 4X2 ball joints and steering linkage if equipped with zerk fittings. Lubricate 4X2 front wheel bearings, replace grease seals, and adjust bearings (if not equipped with sealed bearings). Change manual transmission fluid. Lubricate 4X4 front hub needle bearings (Excursion). Inspect and lubricate 4X4 front axle shaft U-joints (F250/350/450/550 and Excursion). Multi-point inspection (recommended) DEALER VALIDATION: Normal Schedule Trucks, Fullsize Vans & SUVs RO#: DATE: P&A CODE: MILEAGE: Scheduled Maintenance 19 Normal Schedule Trucks, Fullsize Vans & SUVs