2005 Ford Mustang Owner Guide 3rd Printing - Page 48

Driver Controls • If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. • If the vehicle speed decreases to 30 mph (48 km/h) or less, your speed control will disengage Disengaging speed control To disengage the speed control: • Depress the brake pedal or clutch pedal (if equipped) Disengaging the speed control will not erase previous set speed. Resuming a set speed Press the RES (resume) control and release it. This will automatically return the vehicle to the previously set speed. The RES control will not work if the vehicle speed is not faster than 30 mph (48 km/h). RES SET Increasing speed while using speed control There are three ways to set a higher speed: RES • Press and hold the SET + control until you get to the desired speed, then release the control. SET • Press and release the SET + control to operate the Tap-Up function. Each tap will increase the set speed by 1 mph (1.6 km/h). • Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed press and release the SET + control. Reducing speed while using speed control There are three ways to reduce a set speed: RES • Press and hold the SET - control until you get to the desired speed, then release the control. SET • Press and release the SET - control to operate the Tap-Down function. Each tap will decrease the set speed by 1 mph (1.6 km/h). 48 2005 05+ Mustang (197) Owners Guide (post-2002-fmt) USA (fus)