2005 Ford Taurus Owner Guide 4th Printing - Page 41

Lights 3. On the underside of the spoiler, remove the two decorative screw covers (on the LED module). 4. Remove the two screws that are holding the LED module in place. 5. Remove the wiring harness grommet and disengage the electrical connector. 6. Replace the LED module. 7. To complete installation, follow the removal procedure in reverse order. Replacing license plate lamp bulbs Wagon 1. Make sure headlamp switch is in OFF position and remove screw and the license plate lamp assembly from liftgate. 2. Remove bulb socket by turning counterclockwise. 3. Carefully pull the bulb out from the socket and push in the new bulb. 4. Install the lamp assembly on liftgate with screw. Sedan 1. Make sure headlamp switch is in OFF position and open trunk lid. 2. Carefully twist and pull the socket from the lamp housing. 3. Carefully pull the bulb from the socket and push in the new bulb. 4. Reinstall the socket in the lamp housing and twist to secure. 41 2005 Taurus (tau) Owners Guide (post-2002-fmt) USA (fus)