2005 Ford Taurus Scheduled Maintenance Guide 4th Printing - Page 25
2005 Ford Taurus Manual
Page 25 highlights
NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 120,000 miles ❑ Change engine oil and replace oil filter. ❑ Inspect tires for wear and rotate. ❑ Inspect brake pads/shoes/rotors/drums, brake lines & hoses, and parking brake system. Inspect wheel ends for endplay and noise. Inspect engine cooling system and hoses. Inspect exhaust system and heat shields. Inspect steering linkage, ball joints, suspension and, if equipped, half shafts, driveshaft and U-joints. Replace engine air filter. Replace fuel filter (see page 47). Replace cabin air filter, if equipped. Replace PCV on all light trucks over 6,000 Gross Vehicle Weight (except for 5.4L 3V engine). Change automatic transmission fluid on vehicles equipped with the Torqshift and 4R100 transmissions. Replace the remote filter element on the vehicles equipped with the Torqshift transmission. Inspect automatic transmission/transaxle fluid level on all other vehicles, if equipped with dipstick. Consult your dealer for your particular requirements. Change automatic transaxle fluid and filter on all vehicles equipped with CVT. Replace climate-controlled seat filters if equipped (Navigator, Expedition, and Aviator). Change manual transmission fluid. Lubricate 4X2 front wheel bearings, replace grease seals, and adjust bearings (if not equipped with sealed bearings). Lubricate 4X2 ball joints and steering linkage if equipped with zerk fittings. Lubricate 4X4 front hub needle bearings (Excursion). Inspect and lubricate 4X4 front axle shaft U-joints (F250/350/450/550 and Excursion). Multi-point inspection (recommended) DEALER VALIDATION: Normal Schedule Trucks, Fullsize Vans & SUVs RO#: DATE: P&A CODE: MILEAGE: Scheduled Maintenance 25 Normal Schedule Trucks, Fullsize Vans & SUVs