2006 Ford Explorer Scheduled Maintenance Guide 3rd Printing - Page 22

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 90,000 miles ❑ Change engine oil and replace oil filter. ❑ Inspect tires for wear and rotate. ❑ Inspect brake pads/shoes/rotors/drums, brake lines & hoses, and parking brake system. Inspect wheel ends for endplay and noise. Inspect engine cooling system and hoses. Inspect exhaust system and heat shields. Inspect steering linkage, ball joints, suspension and, if equipped, half shafts, driveshaft and U-joints. Replace engine air filter. Replace fuel filter (see page 47). Replace cabin air filter, if equipped. Change automatic transmission fluid on vehicles equipped with the Torqshift transmission. Replace the remote filter element on the vehicles equipped with the Torqshift transmission. Inspect automatic transmission/transaxle fluid level on all other vehicles, if equipped with dipstick. Consult your dealer for your particular requirements. Replace climate-controlled seat filters if equipped (Navigator and Expedition). Lubricate ball joints and steering linkage if equipped with zerk fittings. Inspect and lubricate 4X4 front axle shaft U-joints (F250/350/450/550). Multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 95,000 miles ❑ Change engine oil and replace oil filter. ❑ Inspect tires for wear. Rotation recommended for ❑ optimal tire life. Multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 22 Scheduled Maintenance Normal Schedule Trucks, Fullsize Vans & SUVs