2007 Ford Fusion Owner Guide 2nd Printing - Page 56

Lights 4. Remove screw from oval splash shield access panel from the exterior wheel well area. Lift up and rearward to release a hidden finger attachment at the lower portion of the panel (Passenger side only with ABS). 5. From the exterior wheel well area reach arm through splash shield opening to access bulb socket (Passenger side only with ABS). 6. Remove the protective cap/grill from the housing by grabbing it and pulling rearward. 7. Remove the bulb socket by rotating it counterclockwise, then pulling it straight out of the lamp assembly. 8. Let go of the bulb socket and leave it dangling near the lamp housing (Passenger side only with ABS). 9. Reach over the front bolster in the engine area, with a tool if necessary, bring the bulb socket upwards into an unobstructed area to replace the bulb (Passenger side only with ABS). 10. Disconnect the electrical connector from the bulb socket and discard the old bulb socket. 11. Connect the new bulb socket to the electrical connector. 56 2007 Fusion (fsn) Owners Guide (post-2002-fmt) USA (fus)