2007 Ford Mustang Shelby GT500 Supplement 2nd Printing - Page 10

Chassis SUSPENSION • 8.8 in. solid rear axle with limited slip differential (3.31:1 ratio) Coupe stabilizer bars: • 34 x 5.8 mm tubular front stabilizer bar • 24 mm solid rear bar • Tokico twin tube shocks and struts Convertible stabilizer bars: • 34 x 5.1 mm tubular front stabilizer bar • 20 mm solid rear bar • Tokico twin tube shocks and struts Spring rates: • 34.1 N/mm front and 29.2 N/mm rear (Coupe) • 31.0 N/mm front and 23.0 N/mm rear (Convertible) WHEELS Your SVT vehicle is equipped with unique wheels matched to the tires. These wheels are more susceptible to damage due to their diameter, width and low profile tires. To avoid damage to your wheels: • Maintain proper tire pressure (see Tires previously listed). • Do not drive your vehicle through an automated, commercial car wash due to the vehicle's low ground clearance, tire width and track. Wash your vehicle by hand, with a commercial wand, or by using a touchless commercial wash with no mechanical tracks on the floor. • When installing wheels, always torque lug nuts to specification with a torque wrench. • Inspect your wheels for damage on a regular basis. If a wheel is damaged, replace it immediately. • In the event that you encounter an abnormally harsh impact, inspect the outer diameter of your wheels, both inside and out, for damage. Operating at high speeds Your SVT vehicle is capable of high speeds and is equipped with tires rated for the vehicle's maximum speed. Remember to drive safely, obey all traffic laws and only operate your SVT vehicle at high speeds at locations equipped and designed to do so safely. Before operating your vehicle at high speeds: 10 2007 05+ Mustang (197) Supplement USA (fus)