2008 Ford Expedition Owner Guide 1st Printing - Page 134

Driver Controls degrees between adjacent zones and will become noticeable as the vehicle crosses multiple zones. A correct zone setting will eliminate this error. Refer to Compass zone/calibration adjustment. Compass zone/calibration adjustment 1. Determine your magnetic zone by referring to the zone map. 3 2 2. Turn ignition to the ON position. 3. Start the engine. 4 4. From Setup menu, select the Update Zone function. 5 1 15 14 13 12 6 7 8 9 1011 5. Press and release the RESET until the message center displays a selection to change the current zone setting. 6. Press and release the RESET control until the message center display changes to show the current zone setting (XX). 7. Press and release the RESET control repeatedly until the correct zone setting for your geographic location is displayed on the message center. The range of zone values are from 1 to 15 and "wraps" back to 1. 8. To exit the zone setting mode, and to "lock in" your change: • press and release the SETUP control or, • press INFO control to exit or, • wait 4 seconds and the zone will be "locked in". Perform compass calibration in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 134 2008 Expedition (exd) Owners Guide (post-2002-fmt) USA (fus)