2008 Ford Explorer Sport Trac Owner Guide 2nd Printing (Spanish) - Page 565

Driver Controls To remove the cargo cage: 1. Extend the cargo cage. 2. Pull the lever on each side of the cage to unlock it. Make sure the locking clip screws are loose before removing the cargo cage. 3. Press the locking clips below the middle bar and lift the cargo cage out of the channels on the "D" pillar. To install the cargo cage, follow the removal procedure in reverse order. TONNEAU COVER (IF EQUIPPED) The tonneau cover has been designed to maximize fuel economy and should be fully installed whenever possible. The rear panel can be folded in half and secured behind the cab, or the whole cover can be removed completely from the vehicle. To avoid damage to the cover, do not operate the vehicle unless the cover is fully installed and securely latched, or securely stowed. To avoid damage to the cover, do not stand, sit or load anything on top of the cover. The tonneau cover has been designed to be a water resistant system. A small amount of water may drain into the pickup box with the cover installed. To open the front panel: • Open the driver side lock cover and unlock the front panel using your ignition key. • Lift the panel to access items in the pickup box near the cab. • To close, lower the panel down on the pickup box. Do not drive with front panel unlocked or folded on top of the rear panel. 145 2008 07+ Explorer Sport Trac (esp) Owners Guide (post-2002-fmt) USA (fus)