2009 Ford F450 Super Duty Crew Cab Owner's Manual - Page 129

Driver Controls Setup menu Press and hold the SELECT/RESET button to get into the SETUP MENU sequence from the INFO MENU for the following displays: • Oil Life • Units (English/Metric) • Language • Reset to English (if in another language) (See Note below) Note: When returning to the SETUP menu and a non-English language has been selected, HOLD RESET FOR ENGLISH will be displayed to change back to English. Press and hold the SELECT/RESET button to change back to English. Oil Life XXX% HOLD RESET = NEW An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change (approximately 7,500 miles [12,000 km] or six months) perform the following: 1. Press and release the SELECT/RESET button to display "OIL LIFE XXX% HOLD RESET = NEW". 2. Press and hold the SELECT/RESET button for two seconds and release. Oil life is set to 100% and "OIL LIFE SET TO 100%" is displayed. Note: To change oil life 100% miles value from 7,500 miles (12,000 km) or six months to another value, proceed to Step 3. 3. Once "OIL LIFE SET TO XXX%" is displayed, release and press the SELECT/RESET button to change the oil life start value. Each release and press will reduce the value by 10%. 129 2009 F-250/350/450/550 (f23) Owners Guide, 3rd Printing USA (fus)